Craig Nedrow's latest activity
-
Harbor freight's LED light fixtures seem to be pretty good. Ive had the same ones up for years now under the carport being exposed to... -
Craig Nedrow replied to the thread BBC 489 build.Busy, but not on this. However got the lifters in today, and told my wife this was like diamonds and ruby's to me. Cant wait to get some...
-
-
You can’t use that type of gauge to measure anything with the engine in place. How do you know the pump failed? Did they try to turn the...
-
Craig Nedrow reacted to Nardulli's post in the thread Small Block choices: A feller has too many with
Like.
Update: of the 3 blocks I had, two were cracked. That made the selection simple. Ended up .030 over, 400 crank, 6" rods, 64CC new... -
Craig Nedrow reacted to Ricko1966's post in the thread Small Block choices: A feller has too many with Like.
It's been a while but I think the 040 heads were the hot ticket at one point in time. Decent flow 64cc,late bracket holes. All from...
-
Craig Nedrow reacted to 75gmck25's post in the thread Small Block choices: A feller has too many with Like.
I used Mahle .026 head gaskets with my crate 350 and 64cc Blueprint heads, to try and make up for the low compression of the stock...
-
Craig Nedrow reacted to Nardulli's post in the thread Small Block choices: A feller has too many with Like.
#3 block and the 64cc heads it is. Block and heads headed to the machine shop Monday. There's .050 piston to deck clearance which is...
-
Craig Nedrow reacted to Nardulli's post in the thread Small Block choices: A feller has too many with Like.
UPDATE: Option 1 is FUBAR. See pics. Crank has been cut .010 already and is scored again. 3 cylinders are cracked. I magna-fluxed...
-
Craig Nedrow reacted to 75gmck25's post in the thread LMC AC controller has too many detents with Like.
The dash controller has to match the large vacuum switch bolted on the back (it’s visible in the photo of the newer switch). You...
-
Craig Nedrow reacted to legopnuematic's post in the thread LMC AC controller has too many detents with Like.
1973-1975 HVAC control: 1976-77 Later is similar to 76-77 but minor changes.
-
Probably right. I miss that guy, he had quite the car collection, even had a shortbed square, 3 on the tree, camper shell, and he...
-
I guess also check the rear cab mount bushings too. If they are falling apart, it could also cause the issue.
-
With all due respect, you may just be wasting your time with that plan of attack. One of the major culprits of door sag is the door...
-
It looks to me like the focus is in the wrong area here. While the doors may be sagging slightly, the door/fender gap is FAR worse than...
-
Craig Nedrow reacted to EastAustinSawdust's post in the thread Sagging doors: where to start? with Like.
Are you referring to the bushings between the frame and the body? Is there a specific bushing up front that you’re thinking of? Never...
