Craig Nedrow's latest activity
-
Craig Nedrow reacted to cmichels83's post in the thread Fuel gauge to tachometer, clock to fuel gauge with
Like.
Glowshift sells a small one that will fit if you cut the whole for it. I replaced everything but the fuel gauge. Put the tach in the... -
Craig Nedrow reacted to ChuckN's post in the thread Fuel gauge to tachometer, clock to fuel gauge with Like.
Hey Alex, when I did that conversion I used the LMC tach kit. I could be wrong, and I don’t know if Summit includes any provisions for...
-
one down....349 questions to go :D couldn't resist.
-
If you have the money get the AFR 265 heads. The 109cc will bump compression and that head flows. Camshaft size will dictate octane, but...
-
Sorry for the delay. Im running a Sniper EFI, no numbers but Ive seen other similar builds in the high 500 hp and 600 ft lbs range.
-
Craig Nedrow reacted to v3500bigred's post in the thread AC Condenser - Should I use New Or Original. with Like.
Thanks all, I appreciate the community, glad I found it. I decided to try the new ac condenser (parallel flow) vs the original ac...
-
Craig Nedrow reacted to edgephoto's post in the thread AC Condenser - Should I use New Or Original. with Like.
If you need to replace parts because they are worn, leaking or in rough shape than I agree, replace with modern design. If you need to...
-
Craig Nedrow reacted to Finkaire's post in the thread AC Condenser - Should I use New Or Original. with Like.
Either way you go use an Ester oil, PAG is a corrosive and may take out your evaporator FYI
-
Craig Nedrow reacted to Hunter79764's post in the thread AC Condenser - Should I use New Or Original. with Like.
Newer microchannel condensers can reject a lot more heat than a fin and tube style, no myth or rumor to it. I was an engineer for Lennox...
-
Craig Nedrow reacted to fast 99's post in the thread AC Condenser - Should I use New Or Original. with Like.
Agree, except today original rubber parts are 40-50 years old. Would be advisable to replace with barrier hose and all new o-rings...
-
Craig Nedrow reacted to edgephoto's post in the thread AC Condenser - Should I use New Or Original. with Like.
I have converted hundreds of old R12 systems to R134a. I worked as an auto tech back when they phased out R12. Converting was simple...
-
Craig Nedrow reacted to bucket's post in the thread AC Condenser - Should I use New Or Original. with Like.
If the new one you got is the modern crossflow type, it should work better with the r134a.
-
I think a set of 236 peanut ports properly done would the best choice. Depending on your elevation that would dictate the compression. I...
-
Y'all see this?? O.m.g...
-
I have an 86 k10 Scottsdale short bed. I'm the original owner and am in the process of restoring it. It is in the restoration shop and...
