Craig Nedrow's latest activity
-
Pic of where I am currently... And the Weiend pan im putting on... Test fit says it works.. I ordered a set of KING OEM spec mains... -
Craig Nedrow reacted to Ricko1966's post in the thread Project is stalled. Cannot solve brake problem with
Like.
Let's save some time,don't pull the master yet. I have a giant suspicion that the pedal ratio is wrong and not moving the booster... -
Craig Nedrow reacted to DoubleDingo's post in the thread Project is stalled. Cannot solve brake problem with Like.
When I converted to power brakes, granted it was on a 65 C20, I had to drill a new hole in the brake pedal to relocate the rod, and the...
-
Craig Nedrow reacted to Ricko1966's post in the thread Project is stalled. Cannot solve brake problem with Like.
Change the pushrod pivot location and get a longer pushrod.
-
Craig Nedrow reacted to fast 99's post in the thread Project is stalled. Cannot solve brake problem with Like.
When bench bleeding a master do not bottom out the piston. It is possible to cut one or more cups doing so. Are the caliper bleed screws...
-
Craig Nedrow reacted to Ricko1966's post in the thread Project is stalled. Cannot solve brake problem with Like.
Did you adjust the brake booster pushrod properly? Not the rod from the pedal to the master,the one in the booster that pushes on the...
-
I’m not in the shop at the moment. But it’s about 16” from the bulk head goes to fuse block. So I’ve figured out it goes to that...
-
You're 150 miles away,I'm not coming to help you.
-
Zoom out so I can see the whole wire. Where are you in kansas? You can P.M me of you don't want everyone to know.
-
Craig Nedrow reacted to carnutjw's post in the thread Southeastern GM Truck Nationals.......... 2025 with Like.
I plan to be there. Gonna invite a couple of buddies to join me and camp out nearby for a (straight)guys weekend-heat be damned.
-
Craig Nedrow reacted to Rustisbest's post in the thread Southeastern GM Truck Nationals.......... 2025 with Like.
Wished they would move it to the Spring. Too damned hot in TN in July lol
-
The GM plated studs? DO NOT DAISY CHAIN ALL GROUNDs .you can daisy chain some grounds. The daisy chaining will create what i talked...
-
I finished a re-wire of my 77 a few months back. One of the things I did was to completely create new grounding points with threaded...
-
dirty grounds refer to high amperage grounds at the same location as low amperage ones. The TBIs early on had an issue with this, the...
-
Who's a dirty ground...lol...
