Craig Nedrow's latest activity
-
Craig Nedrow reacted to NickTransmissions's post in the thread Th400 Torque Converter Shaft Seal with
Like.
Check the pump bushing once you have the front seal off. If it's excessively worn, trans would have to come out so it can be replaced. -
Craig Nedrow reacted to squaredeal91's post in the thread Th400 Torque Converter Shaft Seal with Like.
They call it a front pump seal. I've gone rounds with parts counter smart asses lol
-
Craig Nedrow replied to the thread Intake manifold to head port mismatch.BTW Paul, your pup pic was the catalyst of my pic change. Meet Stash, what a character, sometimes known as the trasher, crasher...
-
Craig Nedrow replied to the thread Cylinders washed need help.Matt, I appreciate that article, I think you are the one that brought it up. I'll say it again, study, I have several holly books, and...
-
......and Holley remedied that a long time ago with a checkball in the baseplate. Welcome to the early 90's lol. Of course we couldn't...
-
............and all it takes is one backfire to blow a PV. If it's a Holley PV is bad/leaking, to those who dislike Q jets joking. I...
-
I've always known about the transition circuit,people jack that one up all the time,but also assumed if the power valve was opened from...
-
Power valves richen the main circuit, so unless your idling at 2500 rpm and the boosters are flowing a power valve doesn't affect idle...
-
The way a power valve works is at low vacuum conditions( the farther you are in the throttle the lower your vacuum readings) so when you...
-
it is a brand new, ran for about 20 mins totally when setting the timing. it did idle well with the timing set (idled a bit high and...
-
Is this a new carb or known good? Or no idea the condition? Because if it’s a known good carb it will fire up with gas and vacuum. Not...
-
I unfortunately don’t have a vacuum gauge right now but I will go get one. Not sure what power valve is in it, whatever comes stock in...
-
Be sure you dont have any vacuum leaks.How much vacuum do you have at idle? What power valve is in the carb. If you don't have enough...
-
Change the oil if you're concerned. From the specs in your other thread it's probably gonna want a lot of idle timing. Make sure the...
-
check fuel level/float/ idle mixture, running. Should be fuel just below opening, side of bowl. Accelerator pump only works during...
