Craig Nedrow's latest activity
-
Craig Nedrow reacted to NickTransmissions's post in the thread How many bolts hold the transmission on and where? with
Like.
Not really. It's much easier to simply remove the trans, get it out of the way so the flexplate can be removed and new one installed... -
Craig Nedrow reacted to Keith Seymore's post in the thread How many bolts hold the transmission on and where? with Like.
I wonder if there is enough room to drop the flywheel without undoing the trans, after the torque converter is pushed back? K
-
Craig Nedrow reacted to idahovette's post in the thread How many bolts hold the transmission on and where? with Like.
And, obviously, the torque converter bolts.......
-
Craig Nedrow reacted to ali_c20's post in the thread How many bolts hold the transmission on and where? with Like.
6 bolts. Which transmission ? Th400? Don't forget dipstick and kickdown cables or anything that could bind/ interfere.
-
Craig Nedrow reacted to legopnuematic's post in the thread My-6 new process 3-speed overdrive with Like.
For some visuals, top photo is non OD mopar, second is OD mopar, third is OD GM.
-
Craig Nedrow reacted to Ricko1966's post in the thread My-6 new process 3-speed overdrive with Like.
I do not know this for a fact, just a thought,from knowing how they achieved overdrive on these gear boxes. If I had access to one I...
-
Craig Nedrow reacted to Keith Seymore's post in the thread My-6 new process 3-speed overdrive with Like.
That sounds a bit heavy. I was able to lift it out and back in without assistance (not like a TH400, for example, where I use the floor...
-
Craig Nedrow reacted to Ricko1966's post in the thread My-6 new process 3-speed overdrive with Like.
The aluminum case 883s wear out the case where the countershaft rides,like the Muncie m22s,they can be bushed.The cast iron cases don't...
-
Craig Nedrow reacted to malibuman402's post in the thread My-6 new process 3-speed overdrive with Like.
my MM7 has an aluminum body and weighs about 125 lb's. you can get parts for your shifter on the hurst web site.
-
Craig Nedrow reacted to malibuman402's post in the thread My-6 new process 3-speed overdrive with Like.
just for info, the NP883 also came in 81-87 astro mini vans behind the 4.3. along with the 81 to 87 c10's.
-
Craig Nedrow reacted to malibuman402's post in the thread My-6 new process 3-speed overdrive with Like.
I have a np833 in my 84 c10 behind a 427 big block. i love the trans. i have 373 geared rear end and the truck runs great. you can get...
-
Craig Nedrow reacted to donnieray's post in the thread My-6 new process 3-speed overdrive with Like.
I'll add a little here, parts are available for the transmission, the shifter is the hen's tooth. The Hurst Comp Plus shifter for the...
-
Craig Nedrow reacted to Keith Seymore's post in the thread My-6 new process 3-speed overdrive with Like.
Correct - MY6 uses ATF. https://67-72chevytrucks.com/vboard/showthread.php?p=3662550&highlight=Pig#post3662550 ;) K
-
Craig Nedrow reacted to siataspring850's post in the thread My-6 new process 3-speed overdrive with Like.
Thank you for the information. The drive shaft was a big concern. I wont move it into the in a real garage to look it over for a few...
-
Craig Nedrow reacted to siataspring850's post in the thread My-6 new process 3-speed overdrive with Like.
Thank you for all of your replies. I think it is a great truck. I am going to pull the tranny and see what is up with it. If it is a...
