Craig Nedrow's latest activity
-
Craig Nedrow reacted to ali_c20's post in the thread Recommendations while tearing down for valve job? with
Like.
Do as much as possible within your $ limit when your in there. Check lifters, pushrods and all the parts that are accessible without... -
^^^ This^^^ If a hood latch is out of adjustment, the pressure from the spring can cause the latch to bind more. When you finally get...
-
Anytime I work with grease/oil. Thats about it. (latex) Now that Im older, I started to care.
-
I was going to mention that I've seen 20's with TH350 trannies which are shorter than the TH400. @Idaho, you bought your K20 when I was...
-
Hi all, I am restoring my deceased father's 1974 Chevy K20 Cheyenne that he purchased brand new that year. My father was a farmer and...
-
Craig Nedrow reacted to 75gmck25's post in the thread Can I use this hole for filling oil? with Like.
PCV always need an "in" port in one valve cover and an "out" port in the other valve cover. The PCV pulls constant vacuum toward the...
-
Craig Nedrow reacted to Ricko1966's post in the thread Can I use this hole for filling oil? with Like.
I was just letting you and everyone know,do not put an oil cap in one of those holes,a previous post mentioned the old rubber fill...
-
Craig Nedrow reacted to Truck82's post in the thread Can I use this hole for filling oil? with Like.
I’m not trying to plug the hole with anything that’s not supposed to be there. just wondering if I can fill oil through them. I’ll be...
-
Craig Nedrow reacted to Ricko1966's post in the thread Can I use this hole for filling oil? with Like.
Those aren't the right covers though. Do not try that,you will develop leaks everywhere if you plug one of those holes. If you are...
-
Craig Nedrow reacted to PrairieDrifter's post in the thread Can I use this hole for filling oil? with Like.
10,000..?
-
Thanks, I'll still go ahead and try a new switch, then have one of my electrician buddy's help me with a relay.
-
4 relays. 1 per headlight and function. Wired properly that way, a problem only results in the loss of 1 headlight not all 4 or even...
-
Before you do anything disconnect all headlights at the same time. Take a multi meter and check continuity to ground. Each headlight...
-
^^^^ sorry I meant 89 he's not LS swapped yet.
-
whats a volt meter say at the battery, then at the headlight socket with the switch on ? low voltage means more current and these...
