ChuckN's latest activity
-
ChuckN replied to the thread What have you done to your square lately??.Since the knee has me somewhat sidelined, took my mom out for lunch and finally got that damn good chocolate malt I’ve been after... -
-
^Good tip
-
ChuckN replied to the thread Really tight front brakes!.Start soaking the hard metal line/rubber hose junction now with some PB Blaster. It’s not always a problem but it can be, especially if...
-
Don't knock the 80s, or older for that matter ..........look at what you're driving!!! :33:
-
Block is Mark IV virgin block I have been running. This engine has been excellent, solid, dependable, easy to service, good torque...
-
To build a 489, requires a 4.25 stroke, with a 4.280 bore, so pretty square. Crank is an Eagle cast unit which is plenty good for the...
-
You have a leak in the tranny cooler that's inside the radiator. New radiator time. Ain't worth fixing.
-
Got this little tool today. Don’t have much to say about it accept that it works!
-
ChuckN reacted to Johnny Atomic's post in the thread What have you done to your square lately?? with
Like.
i found some matching seatbelts at the Nashville C10 Nationals in October. On the new set the covers were perfect, but the belts were... -
You have more patience than I. I attempted to repair one of those belts years ago. The spring uncoiled unexpectedly and it did not go...
-
Finished the choke install not super pretty but functional
-
ChuckN replied to the thread Edelbrock carbs on a 350 sm blk.Exactly. I went from the stock (orange I think) springs in mine, no change with the bog. The 1906 already has a bigger accelerator...
-
A frequent complaint with the Edelbrock is a bog when transitioning from steady rpm cruise to quick acceleration. Changing the hole...
-
ChuckN reacted to Matt69olds's post in the thread First real drive! Not tragic but not good. I think I need carb advice. with Like.
Before messing with the carb, make sure the dwell, ignition timing, and the rest of the ignition is in good working order. You will...
-
ChuckN reacted to PrairieDrifter's post in the thread What have you done to your square lately?? with Like.
Got the Mechman 170amp alt installed, along with 2/0 ofc copper cable everywhere. Even the core support and firewall ground lol. New...
