ChuckN's latest activity
-
ChuckN replied to the thread Press-in rocker arm studs migrating up..Man that’s awesome! Have any old photos laying around? -
ChuckN reacted to idahovette's post in the thread Press-in rocker arm studs migrating up. with
Like.
I lost 4 or 5, but under Heavy duty situations. Had a 56 Chevy 2 door wagon, with a standard bore 327, 11.5 to 1 pistons, the optional... -
ChuckN reacted to Bennyt's post in the thread Thoughts on how to recover from a slightly cross threaded spark plug threads in head? with Like.
All good advice here. One additional thing I do is put the engine on exhaust stroke and put an open airline in the exhaust pipe so any...
-
ChuckN replied to the thread What have you done to your square lately??.Oil change day, and I got the deeper offset Halibrands on the front. I had no idea that just a little more dish would make such a...
-
-
ChuckN replied to the thread Press-in rocker arm studs migrating up..Thanks! Carry on, all. Probably been that way the whole time. I’ll update here if anything changes :cool:
-
I wouldn't worry about it at this point,they may have been like that for 20 years,drive it,pay attention to it,you'll here the lifters...
-
ChuckN reacted to Mr Clean's post in the thread What have you done to your square lately?? with Love.
Rebuilding the steering gear box.
-
ChuckN replied to the thread Press-in rocker arm studs migrating up..@idahovette did you lose a bunch of them or just one?
-
ChuckN replied to the thread Press-in rocker arm studs migrating up..Bill, here’s some pics, I didn’t want to continue without them, descriptions sometimes don’t tell a story. This one is the most obvious...
-
-
ChuckN reacted to idahovette's post in the thread Press-in rocker arm studs migrating up. with Like.
Mine was due to high spring pressure from the Z-28 valve springs and high engine revolutions!!
-
That is not enough difference to worry about. They are not as accurate from the factory as people think When they really start to pull...
-
I posted on “what have you done lately “ thread, but thought I’d start a legit thread here. When replacing the valve seals (mid 70s...
-
ChuckN replied to the thread Thoughts on how to recover from a slightly cross threaded spark plug threads in head?.It’s just how my brain works, but my first thought was “of course it had to be #8! It just couldn’t be #1 or 2”. But, it is what it...
-
ChuckN reacted to Ricko1966's post in the thread Thoughts on how to recover from a slightly cross threaded spark plug threads in head? with Like.
Use a chaser. A tap is not first resort. A tap is designed to cut new threads,and it will,and not necessarily at the right angle and not...
-
ChuckN reacted to Bloodhound1981's post in the thread What have you done to your square lately?? with Like.
Thanks! Yes I had it Rhinoed in early October. I debated about whether to paint or line it, I am very happy with the outcome.
