Chris64's latest activity
-
The dash was filthy and flaking so I washed it with warm soapy water and it flaked way worse. I then went with a scrubber sponge and... -
-
I did this about 5 years ago with a Molotow Chrome pen. Still looks good.
-
DISCLAIMER I am by no means a re-upholsterer. There are many different ways and tutorials out there on how to wrap material around...
-
Chris64 replied to the thread Rear brake bleeding struggles.New fear unlocked.
-
No, not on a full floater. Remove the bolts on the axle flange, have a drain pan ready, slide axle out. (Dana 70u) Semi floater C...
-
All fluid for rear brakes comes down 1 line,through 1 hose to a tee which branches left and right if you have fluid to 1 rear the...
-
I put up relevant info on post 18 after my edit. As for the light put on the emergency brake a light should come on in the dash,same...
-
Chris64 replied to the thread Rear brake bleeding struggles.Yes it was covered but you made me think of another question. Where is this light? I didn't notice anything and it's possible the bulb...
-
If and when you go back together with the hub....DO NOT drag the seal over the threads on the housing........you will be taking it back...
-
You have a k20? 1974 would be a full float 14 bolt. 12/10 bolts came in half tons. Inboard rotors/drums are not as convenient as if...
-
Hopefully you have the type of rear end that lets the drums just come off when you take the wheel off. I have the full float 14 bolt...
-
Yup, if you can’t force any fluid thru the wheel cylinder then it’s time to take it apart. If you suspect it’s been (decades) since rear...
-
Chris64 replied to the thread Rear brake bleeding struggles.That 14 bolt process is what I'm watching. Mine is the 10 bolt so maybe it's not quite so exhaustive :oops:
-
Chris64 replied to the thread Rear brake bleeding struggles.You're correct - I meant cylinder. I'm watching videos on replacing the cylinder now. I guess that's in my future. Time to buy some new...
-
Chris64 replied to the thread Rear brake bleeding struggles.We did do this. The rear left bled fine. The rear right did not. It seems like the line or the caliper is blocking any fluid from...
