CalSgt's latest activity
-
CYeah it’s been a adventure fixing all this, when I started the running lights would be on any time the key was on, if I turned on the...
-
CThank you for your replies, gentlemen. I debated how much to put in my OP, but I guess there are a lot of factors I'm trying to weigh...
-
CCalSgt replied to the thread Wiring Harness? Choosing one?.Unless your stock stuff has been burnt up or badly damaged, I recommend just tidying it up and staying stock. The GM harness and fuse...
-
CCalSgt replied to the thread Which aftermarket LED headlights?.I went with the Holley retrobright in mine, for the cost I would have preferred a glass lens but mine are not likely to spend enough...
-
-
CMy buddy runs the glass Hella H4 conversion lights with LEDs in his '76 and it's like being in a modern Benz. The light output is amazing
-
CThere is a left hand thread and a right hand thread. Make sure they match the DS/PS door. :laughing1:
-
CCalSgt replied to the thread Electrical help identification..Rather large lug, looks like the right size to ground to the back of the passenger side head… Just an educated guess though based on...
-
CCalSgt replied to the thread f/w junction block to fuse block.My first picture is the same as yours just out of the truck and cleaned up. That big section of wires is actually 3 separate connectors...
-
CAttached is power coming into fuse box- It tells were it is coming from. Dark grey in the fuse box is the power going to fuses. Here is...
-
CPaint peals and surface rust happens pretty fast but nothing serious. It’s very wet in western Washington.
-
CCalSgt replied to the thread f/w junction block to fuse block.I wonder if your bulkhead connection is burned up… If I read your post correctly someone bypassed the bulkhead and ran an orange wire...
-
-
CCalSgt replied to the thread Black wire connected to indicator lamp.^^^^ This
-
Cfiber optic -probably ash tray light post of when I was trying to figure it out- post-LINK attached is example and where it...
-
CThe 8.1L is totally different than the Gen VI and older BBC engines. It shares almost nothing and you can't use standard BBC parts on...
-
CBoth of those machines are DC only, so no aluminum Tig unless you were to go old school and use helium as a shielding gas and do true...
