CalSgt's latest activity
-
CCalSgt reacted to Grit dog's post in the thread Bilsteins 5100 on 75 k10. Rear shock mounting fit issues with
Like.
Best bet, return the Bilsteins and buy shocks that fit. I’m sure all the issues I had are posted here somewhere. But suffice it to say... -
CCalSgt replied to the thread Potential wiring problem.Mice love wiring insulation for some odd reason
-
CSans the rod.
-
CCalSgt replied to the thread Dual fuel tanks and valves.Pretty! Does the rod go to the bottom of the cab or what? I made a shield out of scrap aluminum , but the stock one is so much nicer
-
-
Chave you had the cluster out lately?
-
CCalSgt replied to the thread Potential wiring problem.I’d guess the gauge wiring has a short somewhere. Trace the wiring back to the firewall bulkhead, inspect for damage or chafing. If...
-
CHello, lots of good info here. Mainly the one about using the correct relay. The one from Rockauto that you ordered doesn't have enough...
-
CCalSgt replied to the thread Dual fuel tanks and valves.I’d like to see one mounted, My truck never had one, or it was removed by the original owner, or Dad took it off and didn’t want to...
-
CHere's a pic of the aforementioned shield.....can see the holes and get an idea where to hunt for bolts.
-
CCalSgt replied to the thread Bilsteins 5100 on 75 k10. Rear shock mounting fit issues.That’s the same part number I used on the rear of my ‘80 K10, I don’t remember any issues. Be sure to check for cracks in the frame...
-
CCalSgt replied to the thread 3in body lift pucks.I’d pull the steering shaft first, and unhook the shift linkage second (for automatic) or clutch for standard before pulling any body...
-
CCalSgt replied to the thread Best header back exhaust package for a 1985 K10 short bed.My first set of duals was a Hooker 2.25” kit from the PAW catalog, IIRC the pipe kit was around $200 and two $29 super turbo Hooker...
-
CCalSgt reacted to bucket's post in the thread Best header back exhaust package for a 1985 K10 short bed with Like.
I've run the Hooker and Dynomax kits for these trucks, many years ago. For the cost at the time, fit was great. I much preferred the...
-
CEmily.. at B62 Upholstery did my bench seat, Good quality but not cheap! You get what you pay for.
-
CCalSgt replied to the thread Correct Exhaust Manifold Bolts.Grade 8s with washers works but don’t look nice and are a far cry from an OE looking bolt. I had bought some 2.5” grade 8’s that I cut...
-
