CalSgt's latest activity
-
CAce hardware
-
CYou can also get bare 1/4 rod. Then just cut threads on each end.
-
CGo your local Autozone, et al and see if they have any all thread / threaded rod. Stores used to keep this in stock in various lengths...
-
CExactly Like I said it was a temporary fix while we were working out of town staying at a Motel, and couldn't be without a truck. I...
-
CGood point. I assumed they’d pull somewhat the same until maybe low fuel level. Which brings out the other workaround of connecting...
-
CRemove the bleeders make sure thay are clear and you can blow through them.Then try 2 man bleeding it now that you have the centering...
-
CWe did do this. The rear left bled fine. The rear right did not. It seems like the line or the caliper is blocking any fluid from...
-
CIf you had to clean out the bleeder screw, and no fluid came out of them, the wheel cylinders are shot. Good news is , if the bleeders...
-
CCalSgt replied to the thread Dual Tanks Fuel switch delete.^^^ This If the system would work well without a selector valve GM wouldn’t have spent the money putting them in. If you need to hack...
-
CIt's going to cause an issue eventually if/ when 1 tank runs low enough to lose prime and siphon effect. NBD I just don't want to be the...
-
C:welcome: Square headlight, or Round?
-
CCalSgt replied to the thread A grand hello From eastern Oregon.Welcome from N.E. California! We need some pictures Sir. I am just finishing up a 3 year restoration of my 1980 K-10...
-
CCalSgt replied to the thread Cab bottom pics needed.@legopnuematic beat me to it but here’s another, also a picture of the skids I built to hold my cab until the bodywork was done and it...
-
-
CIf you like the sound/performance why not just get the same? As said above, it’s totally subjective. Not a single option is going to...
-
COh boy....here we go.
