CalSgt's latest activity
-
CCalSgt reacted to Camar068's post in the thread 700r4/NP208 wont shift into 4lo or out of neutral with
Like.
lol again....thought the truck had to not be moving. If not disregard lol. -
CCalSgt replied to the thread Engine Paint Color Question.it's your truck, paint it whatever color you think looks good. You’re more likely to get judged for sloppy work than for color choice.
-
CPeriod correct schmeriod correct, LS swap the world! lol For a budget build, especially a 4x4, I'd probably stick with a warmed over...
-
CCalSgt replied to the thread Filling small holes without welding.Same ^^^^
-
CUse some copper or aluminum to back the area up, works as a heat sink and helps with bridging a gap. Larger holes a Whitney Jensen hand...
-
CCouple quick pictures from the ad just for you @Rusty Nail :hahano:. The interior is all redone, which is nice because now I don't have...
-
CNice, it looks clean and unmolested. My wife has an 06 LJR, it’s great.
-
CFound a 2000 TJ with 44,000 miles. It’s a 4.0 with a 5 speed manual.
-
CCalSgt reacted to Chris64's post in the thread Surface rust. What are the best practices? with Like.
Found the problem. The spring meant to return the main latch was broken. It's all riveted together. I could probably drill it out and...
-
CCalSgt replied to the thread Surface rust. What are the best practices?.Eh…. Squirt some lube on the latch mechanism and push it closed. I suppose you can work the latch a few times to ensure it moves first...
-
-
CWell ladies and gentlemen I was not firing on all cylinders yesterday . Was able to slide it back within 3/16” of the firewall and now...
-
CCalSgt reacted to Turbo4whl's post in the thread Trying to remove plastic knob on side vent with Like.
@CalSgt The vent doors on early squares have a cable Geatan asked how to remove the knob from the cable. It is not removable, but...
-
CI just did mine today. I removed the horseshoe clip on the rubber end of the line where it goes through the frame. Then I was able to...
-
CCalSgt replied to the thread Ls swap mounting issue.No distributor on LS, they’re fired by coil packs mounted to the valve cover
-
CCalSgt replied to the thread Trying to remove plastic knob on side vent.
-
