CalSgt's latest activity
-
CCalSgt replied to the thread Trying to remove plastic knob on side vent.I couldn’t find a great picture but The plastic rod hooks to a “u” shaped rod that slips through 2 holes in the vent flapper. Can’t...
-
-
CYou ever have one of those moments where you question everything you know about cars…..between the old man and myself over 60 years of...
-
CCalSgt replied to the thread Ls swap mounting issue.Dipstick tube should be able to move a bit, just bend the tab where it’s bolted to the bell housing
-
CI knocked the loose rust off my floorpan and used ZeroRust on it.12 years later still in good shape.
-
CCalSgt replied to the thread Just picked up an LT4 swapped '86 C10.Also… at $17K from Summit probably cheaper than what the original goes for
-
-
CCalSgt replied to the thread Surface rust. What are the best practices?.not sure on the bed… The stuff in the cab I would knock any loose stuff off and epoxy or encapsulate. A D/A with 220 should make light...
-
CCalSgt replied to the thread Ls swap mounting issue.Same Engine should be almost touching firewall
-
CAre the slots not to the rear of the bolts? Looks like it's all the way forward to me.
-
CCalSgt replied to the thread Just picked up an LT4 swapped '86 C10.I automatically assumed he was talking about the new 640hp LT4 from the C7 Vette. Second highest hp motor GM has put in a production...
-
-
CHey y'all, I just picked up a new to me '86 C10 Silverado with a '96 LT4 swap. Working through some issues with it, but the intent is...
-
CCalSgt replied to the thread Father / Son project K10.:welcome: Welcome and cool project! One piece of advice, as I am coming to the end of a 3 year restoration (also a father son project)...
-
CCalSgt replied to the thread Rebuild or Swap?.^^^^ This is a great option on a budget. I re-ringed and put bearings in the 350 that came out of my moms ‘83 K5, it probably had...
-
CIf all you have is blowby, you may be able to get by with a simple rering and bearings,upgrade the cam and heads. Depends on your budget...
-
C.
-
CCalSgt replied to the thread 4x4 wire for dakota digital guages.Yup, the white wire from transfer case provides a ground signal when in 4x4, so long as the black wire from the transfer case is...
