bucket's latest activity
-
I used a stud welder. Stud is tapered on the end - 1/16 to 3/16. Holes are 1/8 (2/16). Set the stud in the hole and lit it up. Snipped... -
I changed the fuel tank selector valve and the problem is fixed, took the truck out for a test ride and no hesitation or stumbling, just...
-
also check the fuel pressure on that pump....
-
I did purchase a delphi pump and I was very careful to make sure the hoses were not kinked or crimped because the tank has to be dropped...
-
bucket reacted to nvrenuf's post in the thread What have you done to your square lately?? with
Like.
Drove it some to make sure it’s ready to go to Cruising the Coast. -
bucket reacted to gmbellew's post in the thread What have you done to your square lately?? with Like.
Windows are on a circuit breaker, not a fuse. so if it struggles and gets hung up, eventually the heat may trip the circuit breaker. it...
-
bucket reacted to Ricko1966's post in the thread What have you done to your square lately?? with Like.
That plug is ALDL nothing to do with windows,I would check my tracks,felts,everything mechanical. Make sure the window can go up and...
-
First drive, flawless. Glad I did those inner fenders, not a single rub.
-
bucket replied to the thread 3 on the tree to sm465 conversion questions.If it were me doing the same swap, cost and availability would be a large reason.
-
bucket reacted to AuroraGirl's post in the thread 3 on the tree to sm465 conversion questions with Like.
or 6
-
bucket replied to the thread Does 33x12.50R15 fit at the rear of a 2wd C10 with stock suspension, stock 8x15 wheels.33's will fit the rear without issue. The 32x11's should be fine up front as well. Years ago I had a 2wd K5 with the same size on 15x8"...
-
bucket replied to the thread 3 on the tree to sm465 conversion questions.2wd 465 uses the single mount, like all the other 2wd's. There's two basic GM styles... one has two bolts for the crossmember, while the...
-
77 k25, 78 k10
-
Like Mason stated, ratio adapter. Auto transmissions can have several different drive gears form the tail shaft, and lots of different...
-
Pretty sure it's just a gear reduction inside. The speedo cable connects to that box.
