BadBowtie's latest activity
-
This will also help you understand the importance of pinion angle. -
I used this method to smooth out my suspension. I did this procedure before and after changing out my rear springs. Added a 4 degree...
-
I am a field engineer for a major car company. I deal with vibrations all the time. Just because tires are new does not mean they are...
-
Thanks. Im pretty sure its not the wheels and tyres, as they are almost new. However, I will get them rebalanced, just because its the...
-
When vibrating at speed put tranny in neutral. If vibration continues would eliminate engine related issue.
-
Typically through the body like you're saying means it's coming from the rear of the truck. Front end vibration you usually feel through...
-
Hi folks, Looking for some hints/pointers. 86 C20 454. Drives great, many parts recently renewed... but ive got a highway speed...
-
Typically the enclosure is what makes a speaker.
-
They look much higher quality than the $35 I spent for some $2 cheap plastic covers which I plan to reshape, reinforce and paint. I...
-
Can try "bolting" the speakers to the panels instead of screws. Maybe some sealer under the flange. Shouldn't be running bass through...
-
Installed a pair of kick panel speakers and they sound like crap. I don't think it's the speakers, I think it's the panels and the tiny...
-
A factory stock air cleaner has a place on the snout to connect that tube, and the connection has a vacuum and thermal controlled...
-
Welcome from Austria. You can remove it if you don't like it sitting there and live in a warm area. I would put it on a shelf, many of...
-
No need to plug it,you might want to keep it,in case you decide you need it in cold weather. It is hurting absolutely nothing sitting...
-
Good day, I recently inquired a 1976 C/20, and noticed there is a tube attached to the bottom of the engine ( Upper stove?). It goes...
