BadBowtie's latest activity
-
BadBowtie reacted to 75gmck25's post in the thread New dash bezel deleting wiper switch on dash with
Like.
Maybe you can use the old wiper switch location for some other type of switch (fog lights, cargo lighting, etc.). Might take a little... -
BadBowtie reacted to Bloodhound1981's post in the thread New dash bezel deleting wiper switch on dash with Like.
For some bizarre reason, when they moved the wiper switch from the dash onto the column lever in 1984, the headlight knob moved up to...
-
BadBowtie reacted to Grit dog's post in the thread New dash bezel deleting wiper switch on dash with Wow.
I have both, can compare but I’m 99% sure the headlight switch is in the same spot
-
I also second the summit 829105 high torque mini starter. Have one on a 10.5:1 468 big block and have never had a problem in 5 seasons...
-
I've been running this Summit mini starter since 2018. Works great. https://www.summitracing.com/parts/SUM-829105
-
Let's say the motor spins at 1000 rpm, then you use gear reduction to reduce it to 300rpm for the engine. By nature of gear reduction...
-
Yep. Ordered the starter and gm starter bolts from Rockauto.
-
One thing you definitely want when you get one of the Permanent Magnet Gear Reduction starters (the smaller case starter the later model...
-
I used a like 1997 truck "mini" starter, I think delco. It's just a factory gear reduction starter, they work great. Haven't had an...
-
Hi 4x4 Team, I am finishing my suburban build and I need a starter. The internally balanced 383 engine block on my 78 burb is out of a...
-
BadBowtie reacted to Grit dog's post in the thread Remember When I was asking for help from anyone locally!. Pic's inside. with Like.
^ Lol at the noise comment. Agree, complete axles in good working condition are just too plentiful and cheap to fck with rebuilding...
-
BadBowtie reacted to Turbo4whl's post in the thread Remember When I was asking for help from anyone locally!. Pic's inside. with Like.
If the pin part of the bolt is still in hole as Rick stated, you can drill it out. Remove just the right side bearing cap, then with a...
-
BadBowtie reacted to Ricko1966's post in the thread Remember When I was asking for help from anyone locally!. Pic's inside. with Like.
There should be markings on the ring gear that tell you gear ratio. Or just count teeth on ring and pinion and divide. The pin for the...
-
BadBowtie reacted to Turbo4whl's post in the thread Remember When I was asking for help from anyone locally!. Pic's inside. with Like.
That was a GM Gov loc diff. Time for a rebuild.
-
BadBowtie reacted to PrairieDrifter's post in the thread Remember When I was asking for help from anyone locally!. Pic's inside. with Like.
Wtf lol... don't need a bolt if you mushroom both ends of the center pin :rofl: colored rtv is always the signature of a true craftsman...
