BadBowtie's latest activity
-
here is a wiring diagram: https://www.mediafire.com/download/9ih3gy2t94wadpt/X8430_1984_GMC_CK_Light_Duty_Trucks_Wiring_Manual.pdf I... -
You shouldn't need to pull out seats. It will run down the side by the driver's door. Usually taking the plastic piece off the lower...
-
Orange wire is taking power to dome light. White wire is ground coming back- it is spliced somewhere slightly above the fuse box with...
-
Should both door switches have 2 wires connected to the switch? Driver side had 2 but passenger side only 1.
-
I get it… there will always be a tracing job. No doubt I’ll have to track down where a lot of these go. But being new to these trucks...
-
Hate to state the obvious, but you will probably just have to start tracing wires to.see where they go. You will probably find one of...
-
I don’t disagree with that! Thanks Hut! You too.
-
Looks like a bird nest. Happy Thanksgiving! HS
-
I've got 3.73 but wish I had 3.42. Kinda $$$$ when you have 4WD.
-
3.42-3.73 I think would be satisfactory for your usage. With the 6.55:1 first (or low) of the sm465 and if that’s not enough you have...
-
My '87 has the stock TBI 350, SM465, 3:42 gears and 33 inch tires. My motor has a few more horsepower than yours so this isn't apples...
-
My truck is a 86 K20. 496bb, 465, 208, 31" tires, 3 :73. That setup is perfect for me. I'm 2000 rpm at 55.
-
Truck is a 1977 K10 with a stock 350, SM465, 31 inch tires, and 3.08 gears. It sees about 70% highway, 20% in town driving, and 10% low...
-
Get a tach,drive your truck,note your rpms at different speeds. Then look at an online gear ratio calculator,see how many rpms you will...
-
BadBowtie reacted to C10Sparky's post in the thread Brought home my first square body. 1980 Silverado C10. Utah with
Like.
Just brought this old girl home. She sat in a field for 10 years. Hasn’t been ran or registered since 2014 it looks like. Excited to...
Latest posts
-
-
FB Marketplace find near Austin, Texas: 5 aluminum K10 wheels $50
- Latest: HotWheelsBurban
-
-
-