BadBowtie's latest activity
-
One of mine has been painted so many times the seam on the B pillar is almost non-existent. Guessing 5-6, stripped 3. I like the look. -
Check the connection for the bulkhead on the firewall. Mine looked tight but I put a socket on it and it was not.
-
I believe that I have verified good grounds. I took a volt meter and have 12V at various points on motor, frame, and body to B+. Not...
-
Yes. The steering column was completely rebuilt as well. I will check on those ground points now that it is daylight.
-
Another possibility, since you have power to lights, but apparently no ignition-switched power. During your restoration, did you...
-
I will check again, but quite certain cluster is grounded. I do have lights, blinkers, and indicators working properly. I know the...
-
Do you remember hooking up the instrument panel ground? Should be a black wire up under the dash, and on an ‘87 connected to a ground...
-
First post, so I apologize if this is wrong spot, or already answered. I have been 2 years into full body off resto of 87 v20 with...
-
The reason for the upgrade was not to do peel-outs. We plan on finding a decent 20' to 24' trailer camper and this is the puller. I do...
-
BadBowtie reacted to legopnuematic's post in the thread Another score from the candy store. with
Like.
.003 backlash? That is way too tight for a street driven setup. For a 12 bolt .006-.010 backlash. If they are used gears I like to check... -
I just remembered a question I had... Can the factory stock open diff have pieces added to it, in order to convert it to a limited slip...
-
Update: I was gonna wait until spring to tackle the diff, but a warm streak was predicted for Fri, Sat and Sunday and I had the itch to...
-
Decided to hit the candy store (Summit) because it's been about a week. Haven't gone my normal frequency cause the demo shelves have...
-
I came to say the same :)
-
Nice truck!!! Perfect height, and color.
