AuroraGirl's latest activity
-
AuroraGirl replied to the thread 3 on the tree to sm465 conversion questions.Do you think my spare bellhousing is this one? -
-
^And there’s load vs pressure charts for all tires. And all tires are rated the same for the same size. Even different load ratings...
-
AuroraGirl reacted to bucket's post in the thread 3 on the tree to sm465 conversion questions with
Like.
Welp. I had ASSumed that you had the typical aluminum bellhousing that was used in the squarebody trucks. My bad, lol. I'm guessing you... -
In theory- follow the pink wire (pnk-30) from 6 point connector- you should come across the same type of connector that is on the...
-
AuroraGirl replied to the thread Daughters ‘87 needs to ride smooth..replace all bushings Anything sprung weight that can be reduced will help, but theres only so much you should lighten on the front end...
-
AuroraGirl reacted to MrMarty51's post in the thread Scores from DIY Parts Yards, Pull A Part, U Pull It etc with Like.
I will check that this morning, bephore heading to working. I need to check the oil on that car and on the 88 Buick Century. Have not...
-
AuroraGirl replied to the thread Hear me out...GMT400 box on a square frame.Gotcha, thanks for clarifying, I had you opposite in one way, and the reason for saying it an entire different way lol. Appreciate it...
-
-
AuroraGirl reacted to Ricko1966's post in the thread Hear me out...GMT400 box on a square frame with Like.
The reason I said run material crosswise was to make up for the difference in widths,your cross pieces will have to be wider than the...
-
AuroraGirl replied to the thread Hear me out...GMT400 box on a square frame.Assuming the places the gmt400 bed is bolted is at the cross member spots of the bed, one could just drive a carriage bolt through the...
-
AuroraGirl replied to the thread Hear me out...GMT400 box on a square frame.@bucket you and anyone else with gmt400 could consider this to be an official "part out" if you are interested in any 1996 truck parts...
-
AuroraGirl replied to the thread Hear me out...GMT400 box on a square frame.Aww thats awesome , plus i know you usually just are playing around <3 I just wish that rust wasnt the natural state of iron and steel...
-
AuroraGirl reacted to SquareRoot's post in the thread Hear me out...GMT400 box on a square frame with Love.
I'm not judging. I admire ingenuity and perseverance.
-
AuroraGirl replied to the thread Hear me out...GMT400 box on a square frame.Oh I see now :)
-
AuroraGirl reacted to Ricko1966's post in the thread Hear me out...GMT400 box on a square frame with Like.
Crosswise just like the bumpers seats windshield. But positioned far enough front to back to line up the GMT mounting holes.
-
AuroraGirl replied to the thread Hear me out...GMT400 box on a square frame.You know it Im an ameri-can not an Ameri-can't And dont judge, Ive saved over 40$ a month for the last 5 years by hauling my own...
