animal's latest activity
-
Dropped the head off at the machine shop, dude was super nice. He told me normally it's $30 per broken bolt but since I'd F'd with them... -
animal replied to the thread C10 Newbie.:welcome:
-
So I just did a light lap on all of them, mainly just to clean up the exhaust valves The oil gunk was like an 1/8" thick in all the...
-
In the meantime last night, I got the other head disassembled (I'd already disassembled the head I was trying to get the bolts out of)...
-
Piddled a little after work last night. Got the 1 broken stud out of the pass side head, chambers and gasket surfaces cleaned up...
-
animal replied to the thread 80 sq body.:welcome:
-
Remembered to take a pic of the cleaned oil pan. Just need to final prep the gasket surface Soaking the lifters in my office lol...
-
animal replied to the thread New Guy from CA.:welcome:
-
Got the rings and bearings ordered, just gotta clean and wait for them to show up
-
Pulled the crank out to look at the tops of the main bearings
-
Worked on getting the bottom end apart after work today. Started by cleaning off the tops of the pistons with some Gunk and a wire brush...
-
So that’s where we stand as of now. Gotta figure out what rings and bearings to order. The original oil pan gasket is still there...
-
Got the cam out. And I couldn’t help it, I looked at the cam bearings. Could see the difference in the top and bottom of the bearing...
-
Welp, got it torn down further after work. Squarebody shock stud works great for getting the balancer all the way off Still nice...
-
Got the manifolds and heads off at lunch. 1 rear manifold bolt is broken off down in the head a bit, 1 is sticking out enough for me to...
