animal's latest activity
-
Good news! That was the case, I got the pinion bearing to make one good "pop" and slip down solid on the pinion. Threw it all back in... -
That's exactly how I look at most things. I knew this was a gamble going into it (though I NEVER expected it to take this long to work...
-
I contacted Revolution to see if they were willing to take a look at some patterns and give some insight. They called me within 15min...
-
animal replied to the thread Back In the Saddle After 40 or So Years.:welcome:
-
animal replied to the thread I am joining the club with a new to me 1977 GMC C15.:welcome:
-
animal replied to the thread New from Tennessee..:welcome:
-
animal replied to the thread New to the Forum.:welcome:
-
Helping my oldest replace valve stem seals on this 4.3 in his S10 blazer. Using the umbrella seals. Question, do we use the umbrella...
-
And finally .0325 PS .006-.007 BL. This one kicked my ass as well, 2.5hrs of dicking around with the shims. What I have learned...
-
Then .025 PS .005-.007 BL still too shallow I think .0425 PS .004 BL
-
Here's some of the damage I found taking the old stuff out. Vertical and horizontal scoring on the pass side race, nothing on the...
-
animal replied to the thread Hello from SW TN.:welcome:
-
Obviously that’s just the first run but these 2-cut gears read so much better than the 5-cuts ever did
-
Got the new Revolution gears in and got everything torn down last Friday. Unfortunately I found one of the carrier bearing races had...
-
animal replied to the thread Hello from AZ.:welcome:
