Recent content by 84GMCSierra

  1. 84GMCSierra

    Cig lighter phone holder issue

    I got mine at Home Depot for $19.99 then I get 10% military discount. I’ll work on it tomorrow along with some step bars I want make work
  2. 84GMCSierra

    Cig lighter phone holder issue

    This one is good but I think I will get a triple outlet at Walmart and mount it under the dash and see if that works
  3. 84GMCSierra

    Cig lighter phone holder issue

    Is there a deeper or better power port/cigarette lighter for our trucks to use a phone holder in? I have an original one socket in my 84 Sierra but the phone holder I have isn't tight in it, like it doesn't go in far enough, and I'm seeing small sparks when I try to plug it in. It has a usb...
  4. 84GMCSierra

    Color match for blue interior

    Sounds crazy but I used Krylon Fusion Blue on the door panels and dash pad, on my 84 Sierra. Pretty close match and it’s holding up good
  5. 84GMCSierra

    No Defrost

    Probably not but will check. know the line that goes in the firewall on the right side keeps coming apart. It was broken so I tried a piece of 1/4" tubing over it to connect the 2 pieces. I'll try to get a pic. Not sure if it'd the line for the defrost or what.
  6. 84GMCSierra

    No Defrost

    I took the AC out in 2019 when I bought the truck so not sure about that part. I will check the rest of the positions though. Thanks
  7. 84GMCSierra

    Alternator cable routing

    Any photos of the factory wire routing for these wires? This is my 84 Sierra. So far I've lucked out and they haven't touched the manifolds.
  8. 84GMCSierra

    No Defrost

    Good Afternoon members. I have a question concerning my defrost not working on my 84 C2500. I'm wanting to know if this little "pot" could be the culprit? The defrost worked for a couple years then went screwy and quit working, but the regular heat works just fine. The "Defroster Actuator" is...
  9. 84GMCSierra

    Remove accessories from this old truck?

    I actually put cab length running boards on my 84 C2500. Only problem is I don't have any support brackets for them and they are "sagging" in the middle. I used 2 strips of 1/8" steel from my work to mount them to the cab. I found a set of Nerf bars for free, so will see if they fit, then will...
  10. 84GMCSierra

    Good parts

    I use RA all the time now. Autozone, and O'Reilly have become so expensive now
  11. 84GMCSierra

    73-87 (91) Fleetside Tailgate Mechanism Repair

    Great write up! Thanks for posting this.
  12. 84GMCSierra

    tighter steering

    I have a 3/4 ton 84 Sierra and was wondering if there is a way to get tighter turning on it? I know these long beds don't turn on a dime, but I'd like to be able to get into straight in parking spots easier than a 3 point turn. Is there a way of doing this?
  13. 84GMCSierra

    Bought an '87 long bed on Bring a Trailer a few days ago

    I started a group a few years ago on Facebook called "All original squarebodies". Woulld like to see it on it sometime.
  14. 84GMCSierra

    Instrument Bezel Referb

    No. I left it like it is for now. It's broken at the lower right corner so will eventually replace it.
  15. 84GMCSierra

    Instrument Bezel Referb

    Yeah. Though it would look decent but no way.
See more

Latest posts

Forum statistics

Threads
42,322
Posts
913,641
Members
33,820
Latest member
tweeter68
Top