77Dmax's latest activity
-
777Dmax replied to the thread Which dually - 8.1 vs pre-DEF 6.6?.8.1s in trucks have the AAM rear. There's no mistaken that diff.
-
777Dmax replied to the thread Which dually - 8.1 vs pre-DEF 6.6?.Yeah the 6.0 is what it is. Another thing to consider is the availability of an 8.1 truck. I'm pretty well immersed in the biz, I've...
-
7Aside from repair costs (injectors and pumps). The rest of this is largely conjecture or lack of knowledge about diesels. Hasn’t been a...
-
777Dmax replied to the thread Which dually - 8.1 vs pre-DEF 6.6?.Clean, stock diesel trucks are out there, you just have to know where to look. Stay away from the diesel forums, those are all beat like...
-
777Dmax replied to the thread Square body on new chassis?.I didn't change them at all. The 05 core support is mostly in place. The rad, intercooler, shroud etc all are mounted as they left the...
-
777Dmax replied to the thread Leaf Spring Torque.10-12 ugga duggas
-
777Dmax replied to the thread Square body on new chassis?.The hydroboost is from the 05. I drilled new holes to mount it. The 77 had a normal booster. That was no big deal at all. The steering...
-
777Dmax replied to the thread 5.7 back fires through carb but timing is good..I would check for a flat cam. Turn it over with the valve covers off and have a look.
-
777Dmax replied to the thread Which dually - 8.1 vs pre-DEF 6.6?.The duramax will have better resale value. Folks are all over the older diesels. The 8.1s are beasts, but will always use way more fuel...
-
777Dmax replied to the thread TBI diagnosis reminder.I would say if the plug wire breaks then you already needed new wires..
-
777Dmax replied to the thread OEM cylinder head castings - 1977 K10.Not for nothing there are way better stock appearing heads out there. I can appreciate the stock build as well though. I have bone stock...
-
777Dmax replied to the thread Longer studs.You can bully .008 through. Keep in mind your hole has already been tunneled out some..
-
777Dmax replied to the thread OEM cylinder head castings - 1977 K10.Gotcha. Did you check the block for your vin?
-
777Dmax replied to the thread OEM cylinder head castings - 1977 K10.Pull a cover, you'll see the number
-
777Dmax replied to the thread OEM cylinder head castings - 1977 K10.882s would be my guess
