-
-
JJamesz replied to the thread 3 on the tree to sm465 conversion questions.Yeah this is getting ridiculous XD
-
JJamesz reacted to bucket's post in the thread 3 on the tree to sm465 conversion questions with
Like.
Hmm. You seem to have a leak there. Lol, sorry I couldn't resist. That's a decent leak too. Bananas and saw dust can't even fix that. -
JJamesz replied to the thread 3 on the tree to sm465 conversion questions.update. I filled the transmission last night to come into about 2 quarts on the floor this afternoon. And it's coming from the front of...
-
-
JJamesz reacted to bucket's post in the thread 3 on the tree to sm465 conversion questions with Like.
Yep, that's all good there.
-
JJamesz replied to the thread 3 on the tree to sm465 conversion questions.I took some pictures of it today so I could make sure we were thinking about the same thing. So is this what yall are kind of talking...
-
-
JJamesz reacted to bucket's post in the thread 3 on the tree to sm465 conversion questions with Like.
The 2wd crossmembers don't use that setup. There was a couple different designs, but they all used either extra bracing to the top of...
-
JJamesz reacted to AuroraGirl's post in the thread 3 on the tree to sm465 conversion questions with Like.
fit isnt the issue, the original bolts were longer on the crossmember to frame, and used a spacer on top of the bottom of the frame rail...
-
JJamesz replied to the thread 3 on the tree to sm465 conversion questions.I am using new hardware. The old stuff that came off the crossmember was nasty and missing a bunch of pieces. I got all new bolts, nuts...
-
JJamesz replied to the thread 3 on the tree to sm465 conversion questions.Here's a picture of it when I was cutting the floor.
-
-
JJamesz replied to the thread 3 on the tree to sm465 conversion questions.I got a high hump cover Im installing right now. And I don't know anything about spacers? I don't think I need the skid plate because i...
-
JJamesz replied to the thread 3 on the tree to sm465 conversion questions.WE ARE SOO BACK EVERYONE. Got the tranny in last night and the crossmember in today. I lost one of the trans mount bolts so im gonna...
-
-
JJamesz reacted to bucket's post in the thread 3 on the tree to sm465 conversion questions with Like.
I've always put the lobe into the fork opening.
-
JJamesz replied to the thread 3 on the tree to sm465 conversion questions.On the clutch release bearing which orientation should this lobe be pointed?
-
-
JJamesz replied to the thread 3 on the tree to sm465 conversion questions.
-
-
JJamesz replied to the thread 3 on the tree to sm465 conversion questions.*update* I got the new bell housing and it does fit pretty well the clutch fork that came with it works as it should. I attempted to...
-
-
Loading…
-
Loading…
