-
-
soliddrummer replied to the thread Fuel filler issue. This can’t be right..I like this idea and strangely enough, there were two blocks of wood in the cab of the truck when I got it. -
soliddrummer reacted to Grit dog's post in the thread Fuel filler issue. This can’t be right. with
Like.
Weird test to your theory, try driving it up on some wood blocks at the gas station and see if the “slope” is really the issue... -
soliddrummer reacted to Bennyt's post in the thread Fuel filler issue. This can’t be right. with Like.
Had a hard time filling one of the tanks on my '90 C30. I changed the hoses, both fill and vent on both sides, as one of the vents had a...
-
soliddrummer reacted to Bextreme04's post in the thread Fuel filler issue. This can’t be right. with Like.
It's hard to tell from your picture, but it doesn't look like that is true. I have an 80 K25 8600GVW with dual tanks just like you and...
-
soliddrummer reacted to DoubleDingo's post in the thread Fuel filler issue. This can’t be right. with Like.
Maybe get new hoses for the filler, and cut an inch off the part that goes on the tank nipple? This may get it to be a downward slope
-
soliddrummer reacted to DoubleDingo's post in the thread Fuel filler issue. This can’t be right. with Like.
It does because of the siphon effect. In this case the fluid is being forced at a higher rate than it can flow out to get the siphon...
-
soliddrummer reacted to Rickf's post in the thread Fuel filler issue. This can’t be right. with Like.
Maybe trim a little off the tank end of the hose? Could it have been a C&C at some point and a bed installed? That could explain the...
-
soliddrummer replied to the thread Fuel filler issue. This can’t be right..I believe the next step as everyone else mentions is to do some dissassembly and see what is going on in there. The sending unit is bad...
-
soliddrummer replied to the thread Fuel filler issue. This can’t be right..The filler tube is wide open. But it runs uphill. The gas cannot get into the tank without pooling. It’s almost like a p trap under a...
-
soliddrummer replied to the thread Fuel filler issue. This can’t be right..This is my train of thought as well. Since the filler tube is bigger, it should flow gas at any rate, but due to the angle of the filler...
-
soliddrummer replied to the thread Fuel filler issue. This can’t be right..My truck is LT9. I found it on the build sheet.
-
soliddrummer replied to the thread Fuel filler issue. This can’t be right..Wow. Ok. This is news to me. It’s a k35 1 ton dually. I’ll have to check the glove box sticker when I’m there next (it’s at my shop). I...
-
soliddrummer replied to the thread Fuel filler issue. This can’t be right..My truck is a 1980 so the leaded gas option is a no. It’s a very stock truck, and the fill tubes are not bound up in any way. I MAY have...
-
soliddrummer reacted to AuroraGirl's post in the thread Fuel filler issue. This can’t be right. with Like.
Heres my stock passenger side tank (non functional, rusted badly on the filler neck, and a few holes in the tank) seems like your...
-
soliddrummer replied to the thread Fuel filler issue. This can’t be right..I also realize there may ALSO be vent issues, but this angle of the filler tube can’t ever have worked. How was the previous owner...
-
-
Loading…
-
Loading…
