410 John's latest activity
-
I also like VW's and have one waiting in the wings for me to get to it. Hurst made aftermarket shifters for them and I have found one of... -
410 John replied to the thread Let’s see your memorabilia?!.Probably a 1/4 midget.
-
Found this in the junkyard back in 2020. It was old, so naturally I had to look it over. On its glass it had these awesome stickers...
-
OK, here's a sample that I don't think will violate any of the forum rules! And what memories it brings back! :cheers:
-
I was mainly talking about your pic of your balancer. Not blue engine
-
410 John replied to the thread Edelbrock accelerator pump.My pics are the 3 above. The blue engine pics(not mine)are very similar. I would say my balancer is a bit further out. I don’t know...
-
I can see how your balancer looks stepped out a little but not too much. It's still under the marker. Is your crankshaft bolt tight?
-
410 John replied to the thread Edelbrock accelerator pump.I added pics
-
I know you’ve had it apart, but have you gone through and actually rebuilt it with all new gaskets and give it a good cleaning? And when...
-
410 John replied to the thread Edelbrock accelerator pump.Not my pics. But, balancer is spaced out like the blue engine pic a my tab I calibrated like the other pic. Without the water pump...
-
-
410 John replied to the thread Edelbrock accelerator pump.It’s hard to see, but the shiny part under the water pump is the back edge of the balancer. Plus the bottom view.
-
-
Have you checked vacuum advance pod? Is it working? Does the carb have proper vacuum to that port for vacuum advance?
-
If you get a piston stop, and then find the balancer is one that puts TDC at the 2:00 position, use an aftermarket timing pointer that...
-
410 John replied to the thread Edelbrock accelerator pump.I haven’t checked the vac pod. But, I will. I know the mechanical advance is t frozen. The carb has two vac ports. Right now I have it...
-
410 John replied to the thread Edelbrock accelerator pump.Ills see if I can take a pic tonight. I messed with the time, because the wires were all moved over one terminal. I wanted to fix it...
