-
-
BBlazerbiker replied to the thread V1500 suspension question.For checking level, measure the body crease, not the fender openings. That said, you may not like it level because of the visual...
-
BBlazerbiker replied to the thread 14bolt FF size vs 10bolt.You'll need an 8 lug version caliper mounting bracket. The 8 lug rotor is larger and the caliper mount will move the caliper out...
-
BBlazerbiker replied to the thread Power steering gear box.Put the front axle on jackstands so that there is no weight on the tires and do the same test. This will take everything in the...
-
BBlazerbiker replied to the thread Wanting 4" suspension suggestions.I am, and be careful with that title!
-
BBlazerbiker replied to the thread 2.5" Skyjacker final thoughts.A set of extended bumpstops would not be a bad idea to add. Softer springs travel farther and when they're made of thicker material...
-
BBlazerbiker replied to the thread Wanting 4" suspension suggestions.You live in a place that's different from what a lot of guys have for offroad use, you might want to consider stepping up the suspension...
-
BBlazerbiker replied to the thread Suburban frame interchange.Do what you can to get them side by side and measure out mounting point by mounting point. You have a good chance of making it work...
-
BBlazerbiker replied to the thread What gears.I've found 4.56s and 35s with the TBI350 to be a decent combo. Still very power limited but at that point it's mostly a power problem...
-
BBlazerbiker replied to the thread Planning my Suburban build - Advice wanted.Take a look at Willomet fab 'burb: Willomet Fab Suburban It's about as go anywhere and do anything as you're going to find. I'd...
-
BBlazerbiker replied to the thread Header clearance front shackle 86 k10.We've had pretty good luck with the Hedman 69830. They tend to sit higher in the chassis and have good shackle clearance. There are...
-
-
Loading…
-
Loading…
