quicksilver702
Latest activity Postings About
-
-
quicksilver702 reacted to CrazyArk's post in the thread Loss of one of our members, ole mtnmankev with
Like.
Took me some time to post this. But in the very early hours, we lost mtnmankev. A brilliant and goofy individual I had known for a... -
quicksilver702 replied to the thread TH350 Plug Question in case.I wanted to post a resolution of this plug removal to complete the record. I carefully (and at low speed) used a 1/8" drill to...
-
-
quicksilver702 replied to the thread TH350 Plug Question in case.Thank you! I appreciate that!
-
quicksilver702 reacted to NickTransmissions's post in the thread TH350 Plug Question in case with Like.
Nice, thanks @quicksilver702. Reach out to me off-line if you run into any problems with the build...Since we are in the same city (I'm...
-
-
quicksilver702 reacted to NickTransmissions's post in the thread TH350 Plug Question in case with Like.
You should be able to either drill through it (be very careful if electing to do to this) or perhaps punch it out with a drift by...
-
quicksilver702 replied to the thread TH350 Plug Question in case.Yes, I still have the modified valve body. It's currently disassembled.
-
quicksilver702 reacted to NickTransmissions's post in the thread TH350 Plug Question in case with Like.
Looks like someone may have modified that unit for manual shifting. What does the governor look like? Is the manual low control valve...
-
quicksilver702 replied to the thread TH350 Plug Question in case.Yes, it has been heavily modified for manual shifting. There was no governor at all in there. The valve body has been extensively...
-
I'm getting ready to do final assembly and during inspection, found what appears to be a plug in the valve body area of the case (pics...
-
-
Should be able to. Was the hole for the shaft also threaded and plugged?
-
Check to see if the direct clutch was dual-fed internally. If so, that's likely the reason the 2-3 accumulator circuit was blocked off...
-
quicksilver702 replied to the thread TH350 Valve Body Modded.No, there are no threads. I'm guessing it got pressed out? No evidence of dual feed (all rings were on the stator and the circuit...
-
-
I recently picked up a TH350 donor for my C10 to rebuild. In the process of disassembly, I came across a question. The valve body was...
-
-
-
Loading…
-
Loading…
