-
-
Cyrillious replied to the thread Engine start issues.Check and make sure you do not have a vacuum line popped off. I've had that happen and it has done the same thing to me. -
Yes -for a few seconds and stops
-
Cyrillious reacted to LukeDM's post in the thread Planning my Suburban build - Advice wanted with
Like.
Here she is as she sits currently I’ve been looking at rigs like this And damn you’ve gotta love this icelandic look. I’m all ears if... -
Cyrillious reacted to LukeDM's post in the thread Planning my Suburban build - Advice wanted with Like.
Howdy fellas. I'm dreaming about the long term goals for my Suburban. Here's what I'm currently envisioning ORD 4" custom spring lift...
-
I just used the rear 56' springs from a '91 Sub V10 on an '87 V10 pickup that was '52 springs. Knocked out the rivets & drilled the...
-
The holes were already punched. I just removed the rivets & slid the shackle back 4". Pic is still the "52 spring but shackle relocated.
-
Cyrillious reacted to CrazyArk's post in the thread Loss of one of our members, ole mtnmankev with Like.
Took me some time to post this. But in the very early hours, we lost mtnmankev. A brilliant and goofy individual I had known for a...
-
Cyrillious reacted to bucket's post in the thread Need help identifying 12v wire for electric choke with Like.
Yeah, I'd just run a dedicated choke wire from one of the extra ignition power terminals in the fuse box.
-
Cyrillious reacted to 74Blaze's post in the thread Need help identifying 12v wire for electric choke with Like.
I usually just run a wire from the 12V IGN Terminal in the Fuse Box to the Choke. Works great. Just need to find a place to snake it...
-
Im looking for a 1990-1991suburban dash cluster. Im hoping to find one with a tachometer but if not thats okay. Im looking for a...
-
Cyrillious reacted to DoubleDingo's post in the thread New Charcoal Canister and Idle Change with Like.
Looks like you got the wrong canister. OE is a 5 port. New appears to be 3 port and one appears to be plugged. Higher idle after...
-
timing is set with vacuum hose disconnected, if rotor does not spring back that advance is stuck and needs repair
-
You have two advances- one is under the distributor cap, the rotor is screwed to it. It is spring loaded (you’ll see that if you take...
-
Cyrillious reacted to DaytonaJuckes's post in the thread Engine stumbling/stalling in drive with Like.
I did not. I’m learning a lot of this as I go. Didn’t know to unplug the advance. What does that do?
-
Of course, vacuum leaks can be sudden as well as restricted carb circuits. Need to check both. Although I doubt it's the problem check...
-
-
Loading…
-
Loading…
