85K304SPD
Latest activity Postings About
-
-
85K304SPD replied to the thread Post 454 rebuild and oil consumption.Break in oil, and run it hard. The rings need to grind in on the cylinder walls until they seat. Synthetic wont allow that as well as... -
Howdy from Middle Tennessee! Dad helped me drag his farm/sawmill truck out of the trees the other day where it has been sitting for a...
-
Here is the 85 Silverado C10 I recently acquired. It has an L98 TPI and a 700R transmission, even has AC. Everything is working except...
-
Great to find this forum! Have had a 1978 GMC K35 for a few years now. 32,000 actual miles. I think it was originally a 2 door dually...
-
GUIDELINES FOR RETROFITTING R-12 VEH. TO R-134A REVISION: 07/21/94 THIS BULLETIN IS BEING REVISED TO: 1) ADD THE 1991-93 C CARS AND...
-
Hello Joe from Az found this 86 this summer has a 5.7 liter with 273 gears that seems strange to me for a 4 wheel drive had an 86 back...
-
85K304SPD reacted to fatblazer1973's post in the thread 1983 Chevy c30 bench seat upgrade with
Like.
I like the upgraded stuff but there just something about the originals. History, you can see the knowledge learn from decade to decade... -
85K304SPD replied to the thread Cylinders washed need help.Don't forget to lean it out one jet size for every 2000 feet in elevation you are at above sea level. Power valve should be half of idle...
-
Hello been lurking for a bit and thought I’d show my 1986 K20 350 sbc Smh465
-
85K304SPD replied to the thread Big Block Chevy Alum. Intake.Exactly what I am running. Works great.
-
Oval port ... Now that carb setup ^^ might just fit under the hood .. ?? But ... Not building a winder .. Red Line at 5,500 .. This...
-
How 'bout a TR2X with dual 660s :cool: :Big Laugh:
-
Part 2 The shop had to cut new slots in the foam for the correct listings, and fill the old ones. The factory lines are left to right...
-
85K304SPD reacted to SquareRoot's post in the thread Trans braces not installed when motor went in, can I fix with a little welding/fab work? with Like.
It would be easier to unbolt the mount, slip them in and do it the way it was intended. You don't have to take the engine out. Those...
-
Does anyone currently have a big block with the dipstick actually bolted to the block? If so, pics? I've been running 454's since the...
-
-
Loading…
-
Loading…
