Rustisbest
Latest activity Postings About
-
-
Rustisbest replied to the thread Gas hog.Because I stay in my lane. I don't post on anything I don't have direct experience with. -
Rustisbest replied to the thread Gas hog.Yep, the quadrajet chest beating started on page 1 lol But here somebody can ask for help (with pics!) with one and doesn't get much...
-
Rustisbest replied to the thread CARBURETOR DATED.Biggest issue is the carb getting heat soaked in my experience. Get the spacer.
-
@Rustisbest So you think the braided fuel line is causing more heat and it's soaking my gas up with the heat??? Tire size BF Goodrich...
-
Rustisbest replied to the thread Gas hog.If you read he asked specifically about the AVS2 that you don't own. Not what YOU like or are gonna do . The standard performers don't...
-
Rustisbest replied to the thread Gas hog.I've had one on my non squarebody daily for 5 or 6 years. Hit the pedal twice, start it and drive away. I've had to adjust the choke and...
-
Rustisbest replied to the thread CARBURETOR DATED.It's heat soak and the ethanol gas. Get the Edelbrock 4 hole phenolic spacer. It comes with new gaskets and studs. The metal braided...
-
Rustisbest replied to the thread Gas hog.Looks like the quadrajet quota has been met for the month :rofl:
-
Rustisbest reacted to andybflo's post in the thread New build 454 and the wife hates the exhaust smell with
Like.
The last Eddys I installed on a car (a 800 CFM AVS and an 600 or 650 CFM AFB) were cast by Weber in Italy and built in the US. That AVS... -
Rustisbest replied to the thread Changing gear ratios: opinions/suggestions wanted!!.Overdrive ratio between the 700r and 4L80 is .70 vs .75. Barely noticeable. Those RPM numbers are off.
-
Did you pay for the info? It doesn't matter what you do for brackets, the details about the system as a whole are all the same. The...
-
I/we (ORD) have obviously put some thought into this subject over the years. Here are a couple books to use to learn more: Let me...
-
On the local parts store subject no not really, most all of our locally owned mom & pop shop parts slash auto repair businesses were...
-
Rustisbest replied to the thread Icing on the cake !!!.You don't have a local parts place in case they dont work? Usually they'll let you pick through what they have.
-
Rustisbest replied to the thread Icing on the cake !!!.I'm 100% sure they are not shaped the same as what you have already. Good luck lol
-
-
Loading…
-
Loading…
