J
Jarrett Melvin
Latest activity Postings About
-
-
JJarrett Melvin reacted to Truck82's post in the thread Door Window Glass Channel Rock auto vs Lmc with
Like.
I am currently installing the LMC kit in my truck and I really like the quality of them. I have no experience with the ROCKAUTO ones so... -
JHas anyone used the LMC glass channel over the Rock auto one? I ordered the majority of my door parts from Rock auto because I source...
-
-
JJarrett Melvin replied to the thread Door Gap.I actually got out of the truck after my last reply and just gave it a good jolt. It's not exactly perfect. But a whole lot better. Had...
-
-
JJarrett Melvin replied to the thread Door Gap.I did happen to drop this door while getting it ready for paint. I don't suppose and drop liek that could have bent it?
-
JJarrett Melvin replied to the thread Door Gap.I've had to make the holes bigger and really push the fender ahead. The hood fits excellent. Just this door don't want to cooperate. I...
-
JJarrett Melvin replied to the thread Door Gap.The gap seems fine right around the door. I couldn't get it right on the fender first so I took it off, now I can't get right around the...
-
JI've been all day trying to get this door Gap right and nothing seems to work. It's completely tight on the top, but way off just above...
-
-
JJarrett Melvin replied to the thread Chipping Paint.I had some left over paint, so I touched up the underneath. I had a rattle can made up same color to touch up. Of course I over sprayed...
-
-
JCould carefully clean it and reshoot those areas. Otherwise maybe using a gasket maker on under it to seal it and wipe off around it...
-
JI would use a gasket, something like a rubber sheet and just cut my own gaskets. Maybe 1/8" thick or so
-
JI painted my new doors and installed my west coast mirrors, only to chip the paint under under the mirror brackets. What's best way to...
-
-
JIt’s said and done now, but with a little work, could have got everything tucked in without needing a body lift. If you want to run a...
-
JJarrett Melvin replied to the thread 12v Swap Into 87 C30.Installed 2 inch body left and painted. Pretty sure I essed up the lines and position of the white stripe but what's done is done now...
-
-
JJarrett Melvin replied to the thread 12v Swap Into 87 C30.That's interesting, I should definitely look into that
-
JJarrett Melvin replied to the thread 12v Swap Into 87 C30.Still using the dodge tcase for now, it's driver side drop. But I ain't got anything gm to mate to the 47rh. I had a 208 that I read...
-
-
Loading…
-
Loading…
