-
-
animal replied to the thread New Guy from CA.:welcome: -
Got the rings and bearings ordered, just gotta clean and wait for them to show up
-
Pulled the crank out to look at the tops of the main bearings
-
Worked on getting the bottom end apart after work today. Started by cleaning off the tops of the pistons with some Gunk and a wire brush...
-
So that’s where we stand as of now. Gotta figure out what rings and bearings to order. The original oil pan gasket is still there...
-
Got the cam out. And I couldn’t help it, I looked at the cam bearings. Could see the difference in the top and bottom of the bearing...
-
Welp, got it torn down further after work. Squarebody shock stud works great for getting the balancer all the way off Still nice...
-
Got the manifolds and heads off at lunch. 1 rear manifold bolt is broken off down in the head a bit, 1 is sticking out enough for me to...
-
20min later, fit perfect With the inner fenders out, I think I can reach the bellhousing bolts through the sides. I have a 1.5"...
-
Rigged up something to keep the coolant off the front suspension and brakes This was about 6pm last night, got the intake off and...
-
Here's a picture of one of the plugs. It's rusty down in the threads, I'd like to beat whoever did the last tuneup over the head...
-
animal replied to the thread Hello, my name is Derek, and I have Just joined this page, trying to find some good information on working on my new 1978 k30.:welcome:
-
animal replied to the thread Hello, my name is Derek, and I have Just joined this page, trying to find some good information on working on my new 1978 k30.:welcome:
-
animal replied to the thread Noob in Pittsburgh.:welcome:
-
animal replied to the thread *NEW* Become a GMSB Supporting Member.@Shaggy
-
-
Loading…
-
Loading…
