Recent content by Originalthor

  1. Originalthor

    Under the Sheets. Supra MK3

    Got a pile of fluids all changed out. Man I will say the brake fluid was nasty. Struts came in a week early so didn't waste anytime installing them. I also lowered the car about a inch and half. Looks alot nicer now Next up was getting the front black valance reinstalled. Well I will say...
  2. Originalthor

    Are C10 and K10 jacks the same?

    This is the extra one I have from a suburban 4x4 has no j hook.
  3. Originalthor

    Are C10 and K10 jacks the same?

    I believe the c10s have a j hook style to hook onto the control arm. I have a k10 one and it's just a crank style bottle jack
  4. Originalthor

    Jack for Spare 35’s

    My factory jack for my suburban lifts my 33s no problem and has a couple of inches of room left. Any mounts nicely in its factory spot. Now if I could find my tire iron I'd be good to go.
  5. Originalthor

    Under the Sheets. Supra MK3

    Unfortunately its a automatic. If it were stick I probably be worth alot more too. I got the struts all off last night and power steering rack is leaking. I'm having a hard time finding parts for this car that aren't a arm and leg. Rolling the dice on struts from amazon for 600 bucks. Compared...
  6. Originalthor

    Under the Sheets. Supra MK3

    So its time to work on the car under the sheets in the shop. Oddly enough its red aswell like my daughters. Last time running was in 2020. Last time actually drove was roughly 9 years ago. I'm a sucker for pain lol. Least this one was store indoors most its life. All original aswell and 143 km...
  7. Originalthor

    04 Suburban oil pan, whew

    I got a buddy with a 5.3 with bad lifter tick. It likes to puff a pile of blue smoke too on start up random times. Been like that for years. Lol. We have lost all bets on when its gonna die cause it keeps going.
  8. Originalthor

    What lift kit did i just buy

    I agree I need to add some materials to them to go to underside of frame and way bigger bolts. They hang down roughly 2 inches lower then the frame. I got some 4 inch angle iron laying around so will probably use that. I cleaned up the springs and there rough country springs. They do not flex...
  9. Originalthor

    What lift kit did i just buy

    Here's a few more pictures of the shackle drops. The welds on them actually look pretty good for a diy set. The shackle joint has a grease point aswell. Do we think it needs some extra bracing? Also its only held on by 4 bolts which not a fan of.
  10. Originalthor

    What lift kit did i just buy

    So browsing the kijiji coffee and some one posted of this for 200 bucks. I said I'd be there for how ever it takes me to get to his place. The rear springs are 52s and look original so no good to me but the shackle flip may put me where I need to be with in dunno the lift of the front springs...
  11. Originalthor

    Transfer case support brace. Who got one to sell?

    All this talk of the transmission brace and made me remember when I was painting my frame I noticed my front bolt had snapped off. Now my body is sitting back on the frame and isn't gonna be a easy fix now.
  12. Originalthor

    Transfer case support brace. Who got one to sell?

    Pm sent back. Lol double posted the first picture. To many beers building a bumper.
  13. Originalthor

    Transfer case support brace. Who got one to sell?

    I have one for a 700r4 to np241. I can get some measurements to see if it works for you.
  14. Originalthor

    What is this noise/chirp…speedometer cable?

    Sounds just like mine did. I actually pulled the hole cable out and cleaned and used speedo cable lube. The previous owner had used some sort of oil and was gummed up pretty bad.
  15. Originalthor

    Well we bought another one...

    Deadly find there for 1500 bucks. What small town in saskatchewan? I'm in saskatoon and stuff sells for way to much around here if its sitting in a field.

Forum statistics

Threads
42,322
Posts
913,649
Members
33,821
Latest member
78ALB
Top